1. <tbody id="qiaf6"></tbody>
    2. <menuitem id="qiaf6"><dfn id="qiaf6"><menu id="qiaf6"></menu></dfn></menuitem>

      <option id="qiaf6"><source id="qiaf6"></source></option>

      1. 
        

          1. <menuitem id="qiaf6"></menuitem>

            主页 > 知识库 > 网络编程 > PHP >

            PHP

            PHP交叉编译和移植

            来源:中国IT实验室 作者:佚名 发表于:2013-07-23 17:57  点击:
            配置和编译:此处为最简易的版本,disable掉了所有的扩展模块; [plain] ./configure --prefix=/home/pub/johnny/network/install-php --host=mips-linux-gnu --datadir=/home/pub/johnny/network/install-php/data --disable-FEATURE --disable-all CC=mips-
             配置和编译:此处为最简易的版本,disable掉了所有的扩展模块;  [plain]
              ./configure --prefix=/home/pub/johnny/network/install-php --host=mips-linux-gnu --datadir=/home/pub/johnny/network/install-php/data --disable-FEATURE --disable-all "CC=mips-linux-gnu-gcc -EL" "CFLAGS=-EL" "LDFLAGS=-EL"
              make
              make istall
              ./configure --prefix=/home/pub/johnny/network/install-php --host=mips-linux-gnu --datadir=/home/pub/johnny/network/install-php/data --disable-FEATURE --disable-all "CC=mips-linux-gnu-gcc -EL" "CFLAGS=-EL" "LDFLAGS=-EL"
              make
              make istall
              4、测试:
              1)、修改fastcgi.conf
              添加:
              [plain]
              fastcgi.server += (
              "/test.php" =>
              ((
              "socket" => "/tmp/lighttpd.test.event.socket",
              "bin-path" => "/tmp/network/sbin/php-cgi",
              # "bin-path" => "/home/pub/johnny/network/install-php/bin/php-cgi",
              # "bin-path" => "/tmp/NMP/bin/test.php",
              "max-procs" => 1,
              # "host" => "127.0.0.1",
              # "port" => 8081,
              "check-local" => "disable",
              ))
              )
              fastcgi.server += (
              "/test.php" =>
              ((
              "socket" => "/tmp/lighttpd.test.event.socket",
              "bin-path" => "/tmp/network/sbin/php-cgi",
              # "bin-path" => "/home/pub/johnny/network/install-php/bin/php-cgi",
              # "bin-path" => "/tmp/NMP/bin/test.php",
              "max-procs" => 1,
              # "host" => "127.0.0.1",
              # "port" => 8081,
              "check-local" => "disable",
              ))
              )
              2)、把/home/pub/johnny/network/install-php/bin/php-cgi copy 到开发板/tmp/network/sbin/php-cgi
              3)、在/tmp/network/webpages/下创建test.php
              [php]
              
              phpinfo();
              >
              phpinfo();
              >
              4)、开发板上启动lighttpd
              5)、在PC上输入http://192.168.*.*/test.php,则在浏览器上显示php的信息

              有帮助
              (0)
              0%
              没帮助
              (0)
              0%
              香港最快开奖现场直播